MacroSystem Digital Video HDV-Recorder Bedienungsanleitung

User manual

1011Once you have stopped playback, the system returns to the normal live signal video display or a grey screen appears with the text `No HDV Signal´.

1011your recorded video.After entering the menu, a requester appears, allowing you to select the lm that is to be trimmed. After selecting, the trim

12137.8 The PAL MenuIn this menu, you can use the left/right arrows to switch between `60 Hz monitor´ and `50 monitor´.If the connected monitor suppor

1213example, we had chosen 1920x1200, most projector beamers would show no picture and the user would hence not be in a position to set t the required

260-04/06

The following product named "HDV-Recorder" carries the CE seal of conformity on the basis of the guidelines 89/336/EWG of the Commission of

Contents

Legal noticesTo avoid making mistakes during operation, we recommend that you carefully follow the instructions provided in this manual.We have taken

51. General informationCongratulation on purchasing the HDV-Recorder!We would like to thank you for putting trust in our company and hope that this pr

67IEEE 1394. The recorder stores this material if you wish. After that, the video can be output digitally to DVD or analogue via VGA to a hi-res TFT m

67optic cable to connect with a digital audio amplier.Switching to either is not required as the signal is output both analogue and digitally at the

89To power down the HDV-Recorder, select the `Power Off´ item in the main menu with the keypad/keyboard. You can read how to select a menu item in the

89with the arrow up/arrow down keys, and once you have pressed the Ok key, the recorder software shall ask you: `Start recording?´Make sure to select